Question:1

What would you do to achieve safe driving down a continuous steep slope?


  • Use the engine’s braking power by shifting to a lower gear and make only partial use of the brakes
  • It is not recommended to drive in a sharp descent for a long time.
  • You should rely solely on the engine’s braking power.
  • You should step on the brake pedal firmly and continuously to maintain the desirable speed.
Category : Know Your Vehicle

Question:2

When is a blue warning light displayed on the dashboard?


  • All answers are correct.
  • When the high beam is turned on.
  • When the low beam is turned on.
  • When the parking lights are turned on.
Category : Know Your Vehicle

Question:3

What is the permitted tyre size for a vehicle?


  • As determined by the tire manufacturer.
  • Any size of tire, as long as all the vehicle tires are of the same size.
  • As approved by a licensed garage.
  • As determined by the manufacturer and noted in the vehicle’s registration document.
Category : Know Your Vehicle

Question:4

During the vehicle’s annual test, the licensing facility shall register:


  • The number of kilometers traveled by the vehicle, as indicated on its odometer.
  • The number of traffic offenses perpetrated within the vehicle.
  • The number of seatbelts in the vehicle.
  • The number of head-rests in the vehicle.
Category : Know Your Vehicle

Question:5

What maintenance work is required on a motorcycle?


  • Motorcycle periodic treatment is only required before its annual test.
  • In a new motorcycle there is no need to perform regular treatments.
  • A periodic treatment according to the instructions of the garage manager. He knows the motorcycle best.
  • A periodic service according to the manufacturer’s manual.
Category : Know Your Vehicle

Question:6

In a hybrid vehicle:


  • Tire wear is greater than that of regular vehicles because of the second engine.
  • Braking is harder because of the second engine.
  • Fuel consumption is higher than that of regular vehicles, because of the second engine.
  • Fuel consumption is lower than that of regular vehicles.
Category : Know Your Vehicle

Question:7

What is the implication of driving a vehicle with a broken headlamp lens?


  • The light beam is not properly focused and other drivers are blinded by it.
  • Over-cooling of the lamp bulb.
  • Accelerated emptying of the battery.
  • Self-blinding of the driver.
Category : Know Your Vehicle

Question:8

One of the differences between manual and automatic transmission vehicles is that:


  • Fuel consumption is usually lower for manual transmission vehicles.
  • Manual transmission vehicles are noisier.
  • Acceleration capacity is lower for manual transmission vehicles.
  • Manual transmission vehicles have no clutch pedal.
Category : Know Your Vehicle

Question:9

An efficient Braking System with ABS:


  • How braking cancels the ABS.
  • Hard braking will cut out the engine.
  • Hard braking causes stopping on the spot.
  • Hard braking causes vibrations and noise.
Category : Know Your Vehicle

Question:10

How can we reduce air pollution caused by the vehicle’s gas emissions?


  • By washing the vehicle’s fuel tank once a month.
  • By keeping the engine and its surroundings clean.
  • It is impossible to reduce air pollution. It is a constant factor in the vehicle.
  • By regular maintenance of the vehicle’s engine and other systems.
Category : Know Your Vehicle

Question:11

What is the risk of using the GPS navigation system while driving?


  • There is no risk in using the GPS navigation system while driving. It is only beneficial.
  • Disruption of the engine management systems.
  • Driver distraction.
  • Fast draining of the vehicle’s battery.
Category : Know Your Vehicle

Question:12

What should you carefully check while purchasing a used tire for your vehicle?


  • Only that the size of the new tire is identical to that of the old tire.
  • Only that the shape of the tire’s sole (the tire’s surface) is identical to that of the old tire.
  • Only that the air pressure of the new tire is identical to that of the old tire.
  • The tire’s manufacture date, to ensure it is not too old (over 2 years).
Category : Know Your Vehicle

Question:13

What is “wheel locking”?


  • Preventing the wheel from turning while releasing the screw nuts that hold it.
  • It is a device attached to one of the vehicle’s wheels, to prevent movement while parking on a very steep slope.
  • ”Booting” one of the vehicle’s wheels by a certified authority.
  • The vehicle’s wheels stop turning as a result of strong and continuous braking.
Category : Know Your Vehicle

Question:14

How will you recognize brakes overheating?


  • Irregular shaking of the vehicle.
  • The engine will lose its pulling ability.
  • The engine’s oil pressure indicator will light up.
  • By a lessening of braking efficiency and a smell of burned material.
Category : Know Your Vehicle

Question:15

Regular vehicle maintenance, in accordance with the manufacturer’s manual, will:


  • Annuls the need for an annual test.
  • Reduce fuel consumption as well as wear and tear of vehicle parts.
  • Is only required if the vehicle is frequently used.
  • In a new model vehicle, maintenance is not required at all.
Category : Know Your Vehicle

Question:16

What are you required to do if you detect a malfunction in the braking system while driving?


  • Slow down and try to accustom yourself to the situation and complete your drive safely.
  • Slow down and rely on the ABS System.
  • Continue driving very carefully and use the parking brake.
  • Stop driving immediately and ensure that the vehicle is towed to a garage and checked there.
Category : Know Your Vehicle

Question:17

Which type of bulb would you use when required to change a bulb in the vehicle?


  • It is permitted to change a bulb in a certified licensing facility only.
  • A bulb, stipulated in the manufacturer’s manual.
  • It is prohibited to change a bulb without the permission of the treating garage.
  • The type of the bulb is unimportant, as long as it works.
Category : Know Your Vehicle

Question:18

How should a driver verify that the hydraulic brake system is properly functioning?


  • The driver is not required to do anything as regards to the proper function of the braking system.
  • The braking system does not require any checks and treatments by the driver.
  • By checking the level of the brake fluid, checking the braking efficiency, and monitoring vibration and noise whilst braking.
  • B y means of a general check of the braking system once every five years.
Category : Know Your Vehicle

Question:19

What is the consequence of tyre pressure that is too low?


  • Increased driving noise at high speeds.
  • Increased wear and tear of the gear box.
  • Rapid wear and tear of the steering wheel.
  • Accelerated wear and tear of the tyres and reduced vehicle stability.
Category : Know Your Vehicle

Question:20

How can you know that the brake pads are worn out and needs to be replaced?


  • There is a mark on the brake pad that indicates that it is worn out.
  • Only after being checked at a licensing facility.
  • According to the cooling rate of the brakes after a strong braking.
  • You cannot know until the padding completely disappears.
Category : Know Your Vehicle

Question:21

What should you pay attention to whilst parking in a closed parking lgarage?


  • The engine should continue running for at least 20 minutes, until it cools down.
  • The engine should not be left running for a long time, since the parking garaget is poorly ventilated.
  • The engine should not be left running for more than half an hour continuously.
  • Nothing. There are no restrictions on parking inside a closed parking lot.
Category : Know Your Vehicle

Question:22

Wearing a seat belt as required:


  • Keeps the driver in an upright sitting position;
  • Reduces the extent of injury during an accident.
  • Keeps the driver alert.
  • Reduces the driver’s movement in his seat and prevents accidents.
Category : Know Your Vehicle

Question:23

When is it recommended to check the tire air pressure?


  • When the tires are hot.
  • When the tires are cold.
  • Once a year.
  • Before every periodic treatment.
Category : Know Your Vehicle

Question:24

How should you use the gearbox while driving on a continuous descent?


  • The gearbox should be in high gear.
  • The gearbox selector should be in a low gear.
  • The gear used while driving on a continuous descent is of no importance, as long as the brakes function properly.
  • The gearbox handle should be in neutral gear.
Category : Know Your Vehicle

Question:25

What is the function of the ABS system?


  • To prevent tire wear.
  • To prevent excessive use of the vehicle’s brakes.
  • To serve as an additional brake in case of danger.
  • To enable control and steering of the vehicle during braking.
Category : Know Your Vehicle

Question:26

Where can you find information about the vehicle’s required tyre pressure?


  • Only in a licensed garage.
  • In the manufacturer’s manual.
  • In the vehicle’s insurance company.
  • In the vehicle’s registration document.
Category : Know Your Vehicle

Question:27

Wheels that are installed on the same axle must be:


  • Of the same manufacture date always.
  • Of the same size and in compliance with the manufacturer’s manual.
  • Of the same color.
  • Of the same manufacturer.
Category : Know Your Vehicle

Question:28

How would you conduct yourself in case of brake overheating as a result of continuous braking?


  • Continue driving normally and don’t use the brakes much.
  • Use the parking brake temporarily.
  • Continue driving fast to ventilate the brakes.
  • Stop! Wait for the brakes to cool down and continue driving on very low gear.
Category : Know Your Vehicle

Question:29

What are you required to do when the brake-check lamp lights up while driving?


  • Continue driving normally until the vehicle’s periodic treatment.
  • Stop the vehicle and don’t resume driving.
  • Continue driving slowly until the garage.
  • Continue driving normally until the garage.
Category : Know Your Vehicle

Question:30

The one of the functions of the grooves in the tyre tread

31501
  • To facilitate water drainage between the road and the tire and to prevent engine wear.
  • To facilitate water drainage between the road and the tire and to maintain tire air pressure,
  • To facilitate water drainage between the road and the tire and to prevent tire wear.
  • Is too allow water drainage from the tire on wet roads and greater friction and contact with the road..
Category : Know Your Vehicle

Theory test for motorcycles

There are 30 questions you have 40 minutes to answer, at the end of the exam time The test result will be displayed